master cylinder going out!!!!!!!!!!!!!!!!!!!
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
master cylinder going out!!!!!!!!!!!!!!!!!!!
i cant believe this finally got the engine running fine and now i got no brakes and it caused my right front passenger side br5akes to start scrathing and dragging i know its not the pads i changed just under 300 miles back. Well i guess ill be tearing into my brakes tonight and pray its not my master cylinder causing the problem i heard they cost a pretty penny.... hehe wish me luck
#2
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
60 or 70 bucks wow thanx
i was hesitant to call because my friend told it run about $350 hehehe last time i listen to him i changed the rear drums the same time i did the pads and i bleed my brakes last week so im thinking its the master cylinder but 70 bucks thats an easy fix. well easy as soon as i get 70 bucks lol.
#3
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
heheeh if my sse has it
my sse is fully loaded it has every option available witch i have to say is a pain in my @$$ just more stuff to break on a car that old. ill post a pic soon.
#4
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
master cylinder price
I just got off the phone with Autozone heheh trade in price is a whopping $27.99 with a lifetime warranty. ill be changing that just for the fun of it. and ill post that picture tonight hopefully.
#5
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
CV joint
well i removed the tire my outer brake pad was gone my rotor is fried and its all caused by my CV Joint. Never done this before its gonna be fun I can already tell (thats a joke). On top of that my brother sold are digital camera so i gotta borrow one from a friend to post my pics. That will be after i fix the beast!
#6
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
CV joint price
Just got off the phone with the parts store a whopping $79.99 with a $45 core on the front passenger CV joint. .. . . .. . Wonder where im gonna pull that cash from???? Time to call my dad... hehehe
#7
Senior Member
Expert Gearhead
See if they can replace the whole axle shaft...when I did mine, the cost of the axle shaft was cheaper then the CV boot and the other hardware in order to do the repair.
Check that out first
Check that out first
#8
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
axle
sorry should have been more specific that was the price for the full axle. i dont wanna rebuild it that would take forever.
#9
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Apr 2003
Location: San Antonio, Tx
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
agreed
Yep Yep I would have to agree. I'll be home home in 45 mins to start the job tell you the results tommorow. Hopefully i'll be back on the road tommorrow.
#10
Senior Member
Posts like a Turbo
Join Date: Jul 2002
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
How did the CV joint cause the caliper to rub on the rotor?
My front passenger side caliper was also rubbing for a while and I thought it was a warped rotor but after replacing the rotor and pads it is still doing it some so I am guessing the caliper is sticking.
I am going to replace the calipers over the summer.
My front passenger side caliper was also rubbing for a while and I thought it was a warped rotor but after replacing the rotor and pads it is still doing it some so I am guessing the caliper is sticking.
I am going to replace the calipers over the summer.