ECM Code help needed...
Thread Starter
Senior Member
Posts like a 4 Banger
Joined: Mar 2004
Posts: 137
Likes: 0
From: Naples, Florida
ECM Code help needed...
Hi all. I have a code #12 from the ecm reader; the check engine light came on when I got on the freeway at an accelerated rate but the car runs fine. The cruise control doesn't work but everything else does. Any insight would be greatly appreciated. Thanks
Senior Member
Posts like a Corvette
Joined: Oct 2002
Posts: 1,483
Likes: 3
From: New Jersey - Most of Our Elected Officials Have Not Been Indicted
Do you have any other codes besides "12". This just means that the system is operating correctly. What kind of "ECM Reader" are you using to extract these codes?
Senior Member
Posts like a Camaro
Joined: Jul 2003
Posts: 872
Likes: 4
From: Orlando, Florida
Are a gaggle of real scanners on ebay right now,
http://search.ebay.com/otc-2000
Will do a lot more than just display codes, just make sure you get the GM cable, a cartidge covering your year (1993 3-in-1 is best), and the card of readings vs mode.
I have two of them and use often.
http://search.ebay.com/otc-2000
Will do a lot more than just display codes, just make sure you get the GM cable, a cartidge covering your year (1993 3-in-1 is best), and the card of readings vs mode.
I have two of them and use often.
Thread
Thread Starter
Forum
Replies
Last Post
