ECM Code help needed...
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Mar 2004
Location: Naples, Florida
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
ECM Code help needed...
Hi all. I have a code #12 from the ecm reader; the check engine light came on when I got on the freeway at an accelerated rate but the car runs fine. The cruise control doesn't work but everything else does. Any insight would be greatly appreciated. Thanks
#2
Senior Member
Posts like a Corvette
Join Date: Oct 2002
Location: New Jersey - Most of Our Elected Officials Have Not Been Indicted
Posts: 1,483
Likes: 0
Received 2 Likes
on
2 Posts
Do you have any other codes besides "12". This just means that the system is operating correctly. What kind of "ECM Reader" are you using to extract these codes?
#5
Senior Member
Posts like a Camaro
Join Date: Jul 2003
Location: Orlando, Florida
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Are a gaggle of real scanners on ebay right now,
http://search.ebay.com/otc-2000
Will do a lot more than just display codes, just make sure you get the GM cable, a cartidge covering your year (1993 3-in-1 is best), and the card of readings vs mode.
I have two of them and use often.
http://search.ebay.com/otc-2000
Will do a lot more than just display codes, just make sure you get the GM cable, a cartidge covering your year (1993 3-in-1 is best), and the card of readings vs mode.
I have two of them and use often.
Thread
Thread Starter
Forum
Replies
Last Post