so i changed the LIM gasket on my car,..everything went smoothley, but now the car wont start. I checked, and there is lots of fuel pressure, but i think my firing order is messed up. Can anyone throw me a picture of where my wires are supposed to go to which coil?? thanks

The firing order that i am using right now is the same as the l67....and i am also assuming that on my coils...the ones closest to the driver are 6,3 then 2,5, then 4,1 with 4,1 being closest to the passenger side.

i hope im wrong with the order....since i have no idea what else could be wrong. Fuel injectors are clipped in and hooked up, and i have no leftover bolts

The front 3 cylinders are 1, 3, 5, from front to right. Back 3 are 2, 4, 6.

so on my coils...where do they go?? the coil packs are not numbered

thanks

i was using that as a reference...but once again...i dont know on my car...which coil is for which cylinder.

im starting to think I maybe fucked something up

Even if you swapped the coils around, the wires would still go in the same place as shown.

ok...i have spark...and i have fuel...this has to be my firing order...if not...im thinking the only other thing was that damn rtv...what if i put a lil too much on??

btw...the rtv was done two days ago.... so its definetly dry

I can't imagine RTV preventing a start. Unless you gooped up the ends of the spark plugs with it. I'm assuming it'* just on the LIM end seals, and thus nowhere near the plugs. Got all your sensors plugged back in?

just...just checked and double checked that all sensors are plugged in

and yes...the rtv in only on the gasket