Andy Blew a Rod
Thread Starter
Senior Member
True Car Nut
Joined: Sep 2002
Posts: 8,910
Likes: 3
Andy Blew a Rod
Andy, a new user here with the '91 Olds 98, blew a rod in the engine after 197K. It'* strange hearing this on a 3800.
It really sucks for him, he is probably just going to get a new engine.
Has this ever happened before to any of you?
It really sucks for him, he is probably just going to get a new engine.
Has this ever happened before to any of you?
Senior Member
True Car Nut
Joined: May 2002
Posts: 2,621
Likes: 0
From: Edmonton, AB Canada
Re: Andy Blew a Rod
Originally Posted by Sol
Andy, a new user here with the '91 Olds 98, blew a rod in the engine after 197K. It'* strange hearing this on a 3800.
It really sucks for him, he is probably just going to get a new engine.
Has this ever happened before to any of you?
It really sucks for him, he is probably just going to get a new engine.
Has this ever happened before to any of you?
It MUST have been "Knocking" beforehand, but owner might have chosen to ignore it or didn't recognize it knocking. Most usually catch it before this happens. The usual fix was a new rebuilt crank kit & new/used conn. rod. 
Thread Starter
Senior Member
True Car Nut
Joined: Sep 2002
Posts: 8,910
Likes: 3
That'* what happened. This car was making a terrible knock. He told me to look at it, but I don't have any mechanical experience. I knew something was very wrong, so I told him to get it looked at. And sure enough, the rod went.
BTW, this car had many problems before. I think the past owner didn't take care of it very well, and when it was bought 3 months ago, it wasn't given a proper tune up and check up.
BTW, this car had many problems before. I think the past owner didn't take care of it very well, and when it was bought 3 months ago, it wasn't given a proper tune up and check up.
Senior Member
True Car Nut
Joined: May 2002
Posts: 2,621
Likes: 0
From: Edmonton, AB Canada
Originally Posted by Sol
That'* what happened. This car was making a terrible knock. He told me to look at it, but I don't have any mechanical experience. I knew something was very wrong, so I told him to get it looked at. And sure enough, the rod went.
BTW, this car had many problems before. I think the past owner didn't take care of it very well, and when it was bought 3 months ago, it wasn't given a proper tune up and check up.
BTW, this car had many problems before. I think the past owner didn't take care of it very well, and when it was bought 3 months ago, it wasn't given a proper tune up and check up.
That alone should have set off ALARM BELLS!
Guest
Posts: n/a
i broke a rod in a pulling truck i built for my uncle back in 91. the tell tale tach read 7600 rpms when he let go.
it broke the cam, distributor, wedged a lifter sideways in the cam passage. took out 3 other rods and 5 pistons skirts. it drove the cam back and thats what took out the distributor and took it right into the flywheel. i was amazed with all the damage it caused. the only thing left to the motor that was goos was the heads and intake. everything else was junk
it broke the cam, distributor, wedged a lifter sideways in the cam passage. took out 3 other rods and 5 pistons skirts. it drove the cam back and thats what took out the distributor and took it right into the flywheel. i was amazed with all the damage it caused. the only thing left to the motor that was goos was the heads and intake. everything else was junk
Thread
Thread Starter
Forum
Replies
Last Post
acg_ssei
1992-1999
10
Aug 11, 2004 11:23 AM
