Intake air temp (IAT) plug test
10-02-2009, 11:36 AM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Intake air temp (IAT) plug test
Locate your IAT sensor, it'* on the tube that goes from your air box to the throttle body.
Remove the plug by lifting the tab, the wiggle and pull the plug. Do not pull on the wires. Check for corrosion or damage, clean or repair if needed.
Remove the plug by lifting the tab, the wiggle and pull the plug. Do not pull on the wires. Check for corrosion or damage, clean or repair if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Danthurs
Trouble shooting + Test Procedures
0
10-02-2009 12:14 PM
cballweg
Bonneville GXP/ Northstar Powered Cars
6
05-04-2006 02:37 AM
