PCM tray
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
PCM tray
So i finally got my PCM tray after a slight fiasco with intense.. but scott took care of me in the end
Put it in this morning and i thing im going to have a little hack at it with my dremel to make it fit the way i want it too.. maybe ill just end up relocating it, since it stands kinda high and may interfere with my intake when i put it in...
Anyone with a 2000+ have any ideas before i cut it to bits?
Looks like there may be some tight clearance for the FWI unless i move it
Got one of these guys too
Put it in this morning and i thing im going to have a little hack at it with my dremel to make it fit the way i want it too.. maybe ill just end up relocating it, since it stands kinda high and may interfere with my intake when i put it in...
Anyone with a 2000+ have any ideas before i cut it to bits?
Looks like there may be some tight clearance for the FWI unless i move it
Got one of these guys too
#2
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Purgatory
Posts: 6,313
Likes: 0
Received 0 Likes
on
0 Posts
Mine is mounted a little forward (towards the engine) and to the front (towards the rad), sits a bit exposed but thats where it fit flat.
Add a little dab of silicone before mounting it down, my sheet metal screws were loose after a few days.
Add a little dab of silicone before mounting it down, my sheet metal screws were loose after a few days.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PontiacDad
Mine is mounted a little forward (towards the engine) and to the front (towards the rad), sits a bit exposed but thats where it fit flat.
Add a little dab of silicone before mounting it down, my sheet metal screws were loose after a few days.
Add a little dab of silicone before mounting it down, my sheet metal screws were loose after a few days.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
youll see me and the car tomorrow, if your coming with randy. im still working things out on the intake, but im going on vacation next week, so that wont be done in july... hopefully the exhaust and intense PCM will be in by august aswell...
Thread
Thread Starter
Forum
Replies
Last Post