Heat Shield Design

Reply Subscribe

Thread Tools

Search this Thread

04-05-2006, 02:29 PM

Darrel

Guest

Posts: n/a

Heat Shield Design

When i build this up should it just be made to block radiant heat from teh engine or should it compleatly seal off the filter from the engine bay? I'd be willing to bet that sealed off is best (as long as it gets outside air into it...) but what does everyone else do with theirs?

Reply Like

04-05-2006, 02:45 PM

lash

Senior Member

True Car Nut

Join Date: Oct 2005

Location: Central Florida

Posts: 7,030

Likes: 0

Received 2 Likes on 2 Posts

Ideally, you want it to only get cooler air from outside the engine bay, so sealed off completely works pretty well as long as you're getting lots of outside air. Note that some have used gasket material to seal against the hood instead of using a top cover.

Use a quick SEARCH on CAI and you'll find posts from plenty of folks who have done different styles.

Reply Like

04-05-2006, 04:13 PM

redwingsfan34

Senior Member

Certified GM nut

Join Date: Jan 2006

Posts: 2,028

Likes: 0

Received 0 Likes on 0 Posts

redwingsfan34 is on a distinguished road

i was always wondering that -- is there somewhere where someone has like "plans" on how to build one or is it mostly an on your own kinda thing, because i know i need one for mine but i just have no idea what im doing... like is there somthing in techinfo about that?

Reply Like

04-05-2006, 04:34 PM

Darrel

Guest

Posts: n/a

Quote:

Originally Posted by redwingsfan34

well if someone doesn't have plans on here i'll post mine when i'm done with it...

I know what would take care of a lot of peoples questions all in one place.

Reply Like

04-06-2006, 07:54 AM

lash

Senior Member

True Car Nut

Join Date: Oct 2005

Location: Central Florida

Posts: 7,030

Likes: 0

Received 2 Likes on 2 Posts

Hey guys, there are very many detailed write-ups on types of CAI set-ups here. Everything from rice pipe adaptations (popular and straightforward) and built heat shields, to FWI (Fender Well Intakes) which work best on 2000+, to various versions of partial airbox/K&N/Flex Tubing/Rice Pipe combos.

I would guess that the reason there isn't an article in TECHINFO might be that there is more than one way to get good results and opinions and preferences are like a$$holes, everybody has one.

I did a quick search just now on "CAI" and then one on "FWI" and found tons of good write ups and info. I would suggest that anyone interested in doing this take a little time to read what things have been done already. Lots of good info available.

Here'* just a few to read. I suggest you do your own searches for more...

http://www.bonnevilleclub.com/forum/...&highlight=cai

http://www.bonnevilleclub.com/forum/...asc&highlight=

There are actually tons more...

Reply Like

04-06-2006, 07:59 AM

Darrel

Guest

Posts: n/a

thanks for the tip Lash, also, i snooped into the tech info and i don't know how long its been since the last time I was there but it was totally redone! They do have a section for performance mods now, and intake mods has its own little thing in there as well... never saw that before...

Reply Like