mods that dont cost a thing?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: westhampton NY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
mods that dont cost a thing?
Please give me a free mod other than the gutted air box,
Cause I just did it, and it made a huge diffrence : >
Now i'm dying to do something else.
Cause I just did it, and it made a huge diffrence : >
Now i'm dying to do something else.
#2
Senior Member
Posts like a Camaro
Join Date: Nov 2007
Location: MN
Posts: 1,172
Likes: 0
Received 0 Likes
on
0 Posts
clearing your corners. not a performance mod, but it looks sweet.
Clean your Throttle body, maybe run some seafoam through if it has never been done.
Clean your Throttle body, maybe run some seafoam through if it has never been done.
#4
Junior Member
Posts like a Ricer Type-R
Your throttle body needs to be cleaned. All of them do about every 50k. Running seafoam through a vacuum line can clean deposits out of your combustion chambers. Restoring lost power (change the oil and plugs afterwards).
Frankly, in my book if you already have a gutted airbox, fix this first:
http://www.bonnevilleclub.com/forum/...e=article&k=38
Then do the rest of a FULL tuneup, then do this:
http://www.bonnevilleclub.com/forum/...ic.php?t=72403
When you realize how happy that made you, get a performance PCM, then wait until late spring or early summer for a totally unique idea.
Frankly, in my book if you already have a gutted airbox, fix this first:
http://www.bonnevilleclub.com/forum/...e=article&k=38
Then do the rest of a FULL tuneup, then do this:
http://www.bonnevilleclub.com/forum/...ic.php?t=72403
When you realize how happy that made you, get a performance PCM, then wait until late spring or early summer for a totally unique idea.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Dec 2006
Location: westhampton NY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by maxx11778
how much is seafoam?
Where can i buy it?
and how you you get it in the throttle body?
Where can i buy it?
and how you you get it in the throttle body?
this page lists amny application. have any of you used the other applications.
#8
Senior Member
Posts like a Corvette
Join Date: Jan 2007
Location: San Diego, CA
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
Seafoam wants to be sucked into the Upper Intake Manifold. The best access is the brake booster vacuum line. Take it in only a little at a time though...if you take in too much at once you can fill a cylinder with the liquid, hydrolock (solventlock?) and bend a rod :?
You do NOT want to induct seafoam at the mouth of the TB, as it may damage your MAF sensor. The TB wants to be removed from the car and carefully cleaned by hand so as not to damage any sensors. The bore and plate can be cleaned with a toothbrush and carb cleaner; the MAF wants to be cleaned with a special MAF-safe cleaner like this:
http://www.crcindustries.com/auto/co...x?*=Y&PN=05110
You do NOT want to induct seafoam at the mouth of the TB, as it may damage your MAF sensor. The TB wants to be removed from the car and carefully cleaned by hand so as not to damage any sensors. The bore and plate can be cleaned with a toothbrush and carb cleaner; the MAF wants to be cleaned with a special MAF-safe cleaner like this:
http://www.crcindustries.com/auto/co...x?*=Y&PN=05110
Thread
Thread Starter
Forum
Replies
Last Post
19bonnie95
Everything Electrical & Electronic
12
01-08-2012 08:14 AM