Broken Supercharger
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Broken Supercharger
I know i have been gone for a while but recently my case bearing inside the supercharger broke and lets jus say eaton didnt wanna help me but if u ever wanna rebuild the case bearings the napa part numbers are MNJ471S its jus a regular needle bearing
#2
Junior Member
Posts like a Ricer Type-R
Not just a regular needle bearing when compared to our normal suppliers. www.rollingperformance.com and texas thunderbirds both supply us with this bearing, but they add the VERY expensive high-temp grease to each one for us.
What did you use for grease?
What did you use for grease?
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Not just a regular needle bearing when compared to our normal suppliers. www.rollingperformance.com and texas thunderbirds both supply us with this bearing, but they add the VERY expensive high-temp grease to each one for us.
What did you use for grease?
What did you use for grease?
#4
Junior Member
Posts like a Ricer Type-R
Ouch. If you'd bought your bearings from one of our suppliers, you wouldn't have to buy the grease.
Not sure how that compares to the stuff you're supposed to use. Hope it works out for you.
Not sure how that compares to the stuff you're supposed to use. Hope it works out for you.
#5
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Ouch. If you'd bought your bearings from one of our suppliers, you wouldn't have to buy the grease.
Not sure how that compares to the stuff you're supposed to use. Hope it works out for you.
Not sure how that compares to the stuff you're supposed to use. Hope it works out for you.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
everything is fine so far internally with the case bearing in the supercharger i am keeping a close eye on it though jus to make sure nothing else happens
Thread
Thread Starter
Forum
Replies
Last Post
DasSpezielle
1992-1999
12
04-02-2010 08:38 AM