Forced Induction All questions and problems regarding Superchargers, Turbos, NOS, ZEX, intercoolers, water injection, etc.

Belt size for 3.4" pulley

Thread Tools
 
Search this Thread
 
Old 03-24-2005, 06:58 PM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
RPSSEI's Avatar
 
Join Date: Feb 2005
Location: Chicago, Illinois
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
RPSSEI is on a distinguished road
Default Belt size for 3.4" pulley

Will a stock belt size still fit for a 97 SSEi with a 3.4" pulley? If not how much shorter will I need?? Thanks
Old 03-24-2005, 07:29 PM
  #2  
Sol
Senior Member
True Car Nut
 
Sol's Avatar
 
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes on 0 Posts
Sol is on a distinguished road
Default

You need a 660 belt.
Old 03-24-2005, 08:29 PM
  #3  
Member
Posts like a V-Tak
Thread Starter
 
RPSSEI's Avatar
 
Join Date: Feb 2005
Location: Chicago, Illinois
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
RPSSEI is on a distinguished road
Default

a 660 belt? Is that a size or a part #? Also, whos part number? I was going to go with the Goodyear Gatorback. Thanks
Old 03-24-2005, 09:28 PM
  #4  
Senior Member
Posts like a Northstar
 
Glasuan's Avatar
 
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes on 0 Posts
Glasuan is on a distinguished road
Default

The stock belt will fit, but you should get the smaller one ASAP, to insure that it isn't slipping. Incidentally I have been on my stock belt and 3.4 puley for several months now with now problems.
Old 03-24-2005, 10:33 PM
  #5  
Sol
Senior Member
True Car Nut
 
Sol's Avatar
 
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes on 0 Posts
Sol is on a distinguished road
Default

I don't know the exact part # for the Gatorback, but it will end in 660.

I'm running a Gates */C 660 belt with no problems.
Old 03-24-2005, 11:11 PM
  #6  
Senior Member
True Car Nut
 
dbtk2's Avatar
 
Join Date: May 2003
Location: Holt, MI & Lima, OH
Posts: 3,022
Likes: 0
Received 0 Likes on 0 Posts
dbtk2 is on a distinguished road
Default

I don't know about the pre-00 SSEi'*, but the 00+ SSEi'* have a longer belt stock than the GTP'* due to the different coil pack setup. Since the earlier SSEi'* didn't have the upper motor mounts either I would guess they would be the same. If thats the case, the stock belt is a 72.5" long belt, and with a 3.4 pulley you will need a 71.5" belt. Most part numbers for the belt will end in 715 (meaning 71.5 inches).

Edit: Just looked it up, and the pre 00'* do still have the longer belt. So you will need a 71.5" long belt.

Shawn
Old 03-25-2005, 10:27 AM
  #7  
Senior Member
True Car Nut
 
Rogue's Avatar
 
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like on 1 Post
Rogue is on a distinguished road
Default

Thats correct. 715 belt for 3.4 pulley on the H-bodies.
Old 03-25-2005, 10:44 AM
  #8  
Sol
Senior Member
True Car Nut
 
Sol's Avatar
 
Join Date: Sep 2002
Posts: 8,910
Likes: 0
Received 0 Likes on 0 Posts
Sol is on a distinguished road
Default

Gotcha, my mistake.
Old 03-28-2005, 08:56 PM
  #9  
Senior Member
Posts like a Northstar
 
karfreek's Avatar
 
Join Date: Mar 2003
Location: Brewerton NY
Posts: 551
Likes: 0
Received 0 Likes on 0 Posts
karfreek is on a distinguished road
Default

Originally Posted by karfreek
Here are the Part Numbers for the Goodyear Gatorback Drive belts for Series II 3800s for the Bonneville.

Accessory Belt (A/C, Power Steering, etc...) 4060940-$35 @ Autozone
Supercharger Belt-(when Using the stock 3.8" pulley)-4060725-$22 @ Autozone
Supercharger Belt-(When using SLP 3.4" pulley, has to be special ordered, takes 3 days)-4060715-$16 @ Autozone

Hope this helps.

Jay
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
beckster
Forced Induction
4
06-10-2006 01:28 AM
Jrios
2000-2005
9
02-01-2004 06:23 PM
padgett
1987-1991
3
07-21-2003 05:52 PM
Mark Peters
Performance, Brainstorming & Tuning
10
03-21-2003 08:42 PM
BusMaster007
1992-1999
19
01-09-2003 02:09 AM



Quick Reply: Belt size for 3.4" pulley



All times are GMT -4. The time now is 07:36 AM.