In middle of install...some questions/help needed!
#21
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Ok, as long as it is supposed to go down. Makes sense.
Bill, I grounded that wire separately, but since I have those tap-in style connectors I guess I'll go that route and connect it to the HU ground wire.
Bill, I grounded that wire separately, but since I have those tap-in style connectors I guess I'll go that route and connect it to the HU ground wire.
#22
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I got everything in. The CD player works fine, I wasn't worried about that. But I got the lit "SSEI" mount from humount, and it'* not lighting up and I'm pretty darn sure I wired it up right.
Oh yeah, and the faceplate doesn't open up since this is pretty much a flush mount kit. I had a feeling that would be a problem once I saw how the faceplate opened. So right now I can't put CDs in it while it is all installed
Oh yeah, and the faceplate doesn't open up since this is pretty much a flush mount kit. I had a feeling that would be a problem once I saw how the faceplate opened. So right now I can't put CDs in it while it is all installed
#23
Senior Member
Posts like a Northstar
Join Date: Apr 2003
Location: Milton, Ontario
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
It'* an LED lighting system right? If you got the polarity backwards they won't work at all.
I can't help ya with the other issue though...
I can't help ya with the other issue though...
#24
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aCiD
It'* an LED lighting system right? If you got the polarity backwards they won't work at all.
I can't help ya with the other issue though...
I can't help ya with the other issue though...
But no these are not LEDs, they are mini bulbs. You're supposed to wire the red wires for the bulbs(7) to the illumination wire (orange), and connect all the black to ground. Easy enough...did it work? Nope :(
#25
Senior Member
Posts like a Northstar
Join Date: Apr 2003
Location: Milton, Ontario
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
ohhh.... lol, figures the easy part screws up.
This is where I'd have you bust out the multimeter.
All I can say is double check and jiggle all your connections, double check you tapped into the correct 12V line, and the ground lines.
This is where I'd have you bust out the multimeter.
All I can say is double check and jiggle all your connections, double check you tapped into the correct 12V line, and the ground lines.
#26
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I just used a different connector, maybe it'* more secure. I'm going to test right now....*connecting battery cable*.... keys in ignition....HOLY **** IT WORKS!
#27
Senior Member
Posts like a Northstar
Join Date: Apr 2003
Location: Milton, Ontario
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bonnie94ssei
I just used a different connector, maybe it'* more secure. I'm going to test right now....*connecting battery cable*.... keys in ignition....HOLY ***^ IT WORKS!
#28
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
Sonofab.... the face is not opening again. The face of the HU slightly pops up then out, and the mount'* faceplate is in the way...this is really ticking me off. Nothing is ever simple with this car ..ok maybe changing brake pads yesterday, but that'* it!!
Thread
Thread Starter
Forum
Replies
Last Post