4T65E-HD transmission pan bolt torque values
02-09-2008, 12:51 PM
#11
Junior Member
Join Date: Jun 2002
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pan to case is 10 ft-lbs. I always use a torque wrench and have never had a leak.
Bottom Pan removal - 7.0 liters (7.4 qts)
Complete overhaul - 9.5 liters (10.0 qts)
Dry - 12.7 liters (13.4 qts)
1st gear 2.921
2nd gear 1.568
3rd gear 1.000
4th gear .705
reverse 2.385
214 lbs wet
Bottom Pan removal - 7.0 liters (7.4 qts)
Complete overhaul - 9.5 liters (10.0 qts)
Dry - 12.7 liters (13.4 qts)
1st gear 2.921
2nd gear 1.568
3rd gear 1.000
4th gear .705
reverse 2.385
214 lbs wet
02-09-2008, 02:19 PM
#12
Junior Member
Thread Starter
Well, 7.4 is what I should have gotten. Maybe I was a little low before because I put in exactly 2 gallons.
Everything is tightened up to 144 inch lbs. No leaks. I'm a happy camper!
Everything is tightened up to 144 inch lbs. No leaks. I'm a happy camper!
Thread
Thread Starter
Forum
Replies
Last Post
crod101
Performance, Brainstorming & Tuning
11
02-10-2007 11:15 PM