Radio control fix
#4
DINOSAURUS BOOSTUS
Expert Gearhead
They have short wiring on them.. but a small pick or screwdriver stuck in between the buttons and the actual wheel will pop them right out. Then disconnect the wiring and it'* out.
#5
Senior Member
Posts like a Camaro
Join Date: Aug 2004
Location: Chi-Town
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
You might be interested in these replacements:
http://www.zzperformance.com/grand_p...=428&catid=107
http://www.zzperformance.com/grand_p...=428&catid=107
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Jan 2003
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
ZZ, I might be interested if I had a GP . Your adds says works on 97-00 GP ONLY.
My signature says 96 bonneville. Nice fishing ZZ but you didn't catch me.
I took out switch assembly and popped assembly open , removed pcb and took out my soldering iron and solder wick. I swapped the bad volume up switch with never used mute switch and now volume up works and mute doesn't . I can live without mute. Thx, Billboost for your help.
My signature says 96 bonneville. Nice fishing ZZ but you didn't catch me.
I took out switch assembly and popped assembly open , removed pcb and took out my soldering iron and solder wick. I swapped the bad volume up switch with never used mute switch and now volume up works and mute doesn't . I can live without mute. Thx, Billboost for your help.
#8
Senior Member
Posts like a Camaro
Join Date: Aug 2004
Location: Chi-Town
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jebstuart
ZZ, I might be interested if I had a GP . Your adds says works on 97-00 GP ONLY.
My signature says 96 bonneville. Nice fishing ZZ but you didn't catch me.
I took out switch assembly and popped assembly open , removed pcb and took out my soldering iron and solder wick. I swapped the bad volume up switch with never used mute switch and now volume up works and mute doesn't . I can live without mute. Thx, Billboost for your help.
My signature says 96 bonneville. Nice fishing ZZ but you didn't catch me.
I took out switch assembly and popped assembly open , removed pcb and took out my soldering iron and solder wick. I swapped the bad volume up switch with never used mute switch and now volume up works and mute doesn't . I can live without mute. Thx, Billboost for your help.
I am not ZZ. Please look to the left for my name.
Thread
Thread Starter
Forum
Replies
Last Post
ajgullery
1992-1999
12
02-26-2007 02:00 PM
Pontiac1983
Audio (and aftermarket electronics)
6
01-03-2005 01:59 PM