Starter Removal Diffuculty and oil pressure gauge acting odd
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Starter Removal Diffuculty and oil pressure gauge acting odd
How difficult is it to remove the starter on a 94 SE? i'm mechanically inclined actually i'm ASE certified but i live at a condo and it'* a little harder to get in there you know i dont have a lift anymore not working for nissan lol. But if i have to lift the motor and stuff to get that thing out i'll just pay someone i dont have the place to do this anymore. Also the oil pressure is acting odd the car has only 109k on the odo and when it'* cold i'm looking at like 40 to lbs oil pressure but when it gets up to 190 degrees i'm down to like 20lbs and then sometime the buzzer goes. I mean it can't loose that much oil pressure my getting up to temp thats real strange i have never had a car do that or seen it even at the nissan dealership. It'* bothering me i might just replace the sending unit for ***** and giggles. anything else i should be aware of changing this and the starter?
#2
Senior Member
Posts like a Camaro
Join Date: Jan 2004
Location: Colorado Springs C.O.
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
starter is a easy 15 minuet job did it on my wifes 93 with no lift just got to get your head under the front bumpert and it will be easy to see every thing from there it is rite on the front no brace to get in the way 2 bolts and the bat line and the triger that is it
#4
Real easy its only like two bolts and its easy to access. Depending on your prefference use the jack if you need room. I'm a wirey guy but even I still need a little room to get under that bumper
#5
Real easy its only like two bolts and its easy to access. Depending on your prefference use the jack if you need room. I'm a wirey guy but even I still need a little room to get under that bumper
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2005
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
allright i'm kinda fat and lazy and didn't feel like getting in there and giving it hell i'm not to concerned. I just did the rear valve cover gasket lastnight no more leaking oil on the manifold it'* so nice not to have to smell that everytime i start the car you know, I'll just get in there and replace the oil sending unit for 20 bucks what the hell i'll get in there and give it hell.
Thread
Thread Starter
Forum
Replies
Last Post