Winter whore....56k beware!!
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,857
Likes: 0
From: Halifax, Canada 91SSE / 97SSEi
Originally Posted by Jim W
Ya...gimme yer rims 
Senior Member
Posts like a Camaro
Joined: Aug 2003
Posts: 801
Likes: 0
From: Sunshine State
Originally Posted by PontiacDad
Thank you......I am done now, let it cure for 4 hours then back to pic whoe.
This was my first dremel job and a Technical one at that. I could not have done it without mremers pics on his cardomain, Thank you very much sir.
Now what I should I make with that trunk lid mat thing?
This was my first dremel job and a Technical one at that. I could not have done it without mremers pics on his cardomain, Thank you very much sir.
Now what I should I make with that trunk lid mat thing?
This weekend'* project is Angel Eye install (hopefully tips from TaylorD will help) and underhood neon install (I think I am on my own for this one).
Thread Starter
Senior Member
True Car Nut
Joined: Jun 2003
Posts: 6,313
Likes: 2
From: Purgatory
Take lots of pics of the angel eyes....im looking on ebay for a pair.
As for the neons I'm thinkin of going with a wireless remote setup, what do you have in mind :?:
As for the neons I'm thinkin of going with a wireless remote setup, what do you have in mind :?:
Senior Member
Posts like a Camaro
Joined: Aug 2003
Posts: 801
Likes: 0
From: Sunshine State
FYI: My wife got me the Angle eyes from Pepboys for $59
After the behind the grill install of the neons I am probably not going to install any more neons on the exterior of the vehicle, so for me to invest in a wireless setup would be a waste of money. I am going to wire the two 15" tubes together and have them wired directly to a switch that will be fused on a ignition controlled fuse (no ignition, no power). The driving light portion of the angle eyes will be wired to the factory fog switch, and the "eye" will probably be wired to a seperate switch. I am going to try to find a switch bank and install it in place of where my ashtray is (I have the bench configuration, my ashtray is at the bottom of the dash) and have the switches wired to control the angle "eye", under hood neons, and under seat neons.
After the behind the grill install of the neons I am probably not going to install any more neons on the exterior of the vehicle, so for me to invest in a wireless setup would be a waste of money. I am going to wire the two 15" tubes together and have them wired directly to a switch that will be fused on a ignition controlled fuse (no ignition, no power). The driving light portion of the angle eyes will be wired to the factory fog switch, and the "eye" will probably be wired to a seperate switch. I am going to try to find a switch bank and install it in place of where my ashtray is (I have the bench configuration, my ashtray is at the bottom of the dash) and have the switches wired to control the angle "eye", under hood neons, and under seat neons.