I will just post a Screenshot of the tune I going to be loading up next and some crappy cell phone pics, Let the topic got till Sunday night and update with more pics.









Let the discussion begin!

Ridiculous. Nuff said.

OK, 90# injectors, WOW. I'm going to guess 1.95:1 rockers. I see a crazy large turbo in your future.

1.7 Rockers so I can use them with a Intense 3 Turbo Cam
Injectors will flow 103 lb/hr at 50PSI (50PSI gives me 30PSI of boost head room before the pump flow falls off) , which is the base I will run when I get the Bosch 040 in the surge tank

Hmm, your injector flow rate comes out to a bit over 91#.

*whistles slowly* Sounds like a sweet project, can't wait to see it finished!

This is for the Bonneville? If so, awesome!

Well I didnt get the injectors specifications and HPT tables from ID before sunday so I couldn't install the injectors, but did get he axles hubs and new rocker arms installed. I didnt take many pics of that stuff since Dan already has a great pic log of the rocker install and no one cares about hubs and axles

Did you email ID for the full flow stats? I have a table that came with the injectors that lays out injector dead time vs pressure and also shows flow rate vs pressure. I would say that table is most likely correct.

I am really interesed in seeing how she runs on E85.

Yup 2000 SSEi

I'm just going by the spreadsheet I have. And that was 91.25#. I'm sure your tables are more accurate.

Here is a giant picture of the table they sent meh.