putin' my moulding on *step by step*
#1
Senior Member
True Car Nut
Thread Starter
Join Date: Nov 2005
Location: Elberton, GA
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
putin' my moulding on *step by step*
my supplies.
My moulding with the clips on. *thanks Billboost*
Put a little glue on the clips. *see below for tape explanation*
"Press pieces together for 1-3 minutes" My tape did the work for me.
I'll get a final pic on later this evening.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: Nov 2005
Location: Elberton, GA
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 92BonnevileSE
How does the molding stay on? Mines falling off.
Notice the holes: there are supposed to be small hooks on the door to hold the clips on.
The white part: the white part is supposed to clip onto the white piece attached to the moulding.
The top: the top of the clip is shaped like a hook and it latches onto the top of the moulding under the chrome peice.
My hooks are missing, so I had to glue the clips on and they won't hook right, so I glued that.
#6
Senior Member
True Car Nut
Thread Starter
Join Date: Nov 2005
Location: Elberton, GA
Posts: 5,242
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
I think that the PN'* are around there somewhere....I dont show it in my book
or a J/Y part is your best bet
or a J/Y part is your best bet
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ga93sle
Originally Posted by 1993 SLE
I think that the PN'* are around there somewhere....I dont show it in my book
or a J/Y part is your best bet
or a J/Y part is your best bet
#10
Senior Member
Posts like a Corvette
Join Date: Aug 2005
Location: Michigan
Posts: 1,249
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Chris....I'll look for you. Might be one close by.
92BonnevileSE: Do you need some clips? If so PM me
92BonnevileSE: Do you need some clips? If so PM me