my peel and seal (dynamat alternative) install (56k no)
i used 2 rolls of 12" x 33.5ft of peel and seal i bought from menards on sale for $24.99
want the price of dynamat?
http://cgi.ebay.com/ws/eBayISAPI.dll...701762595&rd=1
thats $100 for 36sq ft, thats $2.77 per sq ft
i used 67 sq ft and paid $50, thats $.74 per sq ft
i didnt get my doors done, becase i ran out, you can see where it stopped rigth at the back seat. i would say 3 rolls will do an entire car in 1 layer. i plan on getting 1 more roll and doing the doors, back seat, and the trunks 2nd layer with leftovers
so far it i cant tell if its gonna help at all. the trunk is a lot heavier and shuts with a deeper tone. i had music running from another car while i installed it, and when i sat in the trunk i could get a more defined bass tone rather than just standing in the open.
i expected it to get really hot to the touch since its tar in the hot sun, but its acting more like insulation. while sitting in the trunk installed it, the aluminum was almost cold to the touch, even with the sun on it.
the smell is noticable. tar of course. its not terrible, but i havent ever worked with dynamat to tell you if its the same way.
so far my rating on this product: 9/10











i also used it to fix the leak that was being caused right here where the wires go through the firewall
want the price of dynamat?
http://cgi.ebay.com/ws/eBayISAPI.dll...701762595&rd=1
thats $100 for 36sq ft, thats $2.77 per sq ft
i used 67 sq ft and paid $50, thats $.74 per sq ft
i didnt get my doors done, becase i ran out, you can see where it stopped rigth at the back seat. i would say 3 rolls will do an entire car in 1 layer. i plan on getting 1 more roll and doing the doors, back seat, and the trunks 2nd layer with leftovers
so far it i cant tell if its gonna help at all. the trunk is a lot heavier and shuts with a deeper tone. i had music running from another car while i installed it, and when i sat in the trunk i could get a more defined bass tone rather than just standing in the open.
i expected it to get really hot to the touch since its tar in the hot sun, but its acting more like insulation. while sitting in the trunk installed it, the aluminum was almost cold to the touch, even with the sun on it.
the smell is noticable. tar of course. its not terrible, but i havent ever worked with dynamat to tell you if its the same way.
so far my rating on this product: 9/10











i also used it to fix the leak that was being caused right here where the wires go through the firewall
Nice... my friend tried using the non-dynamatt version and his did one of two things when he treid to put it up:
1- Melted
2- Didn't stick
So it'* good that yours didn't do either of the two...
1- Melted
2- Didn't stick
So it'* good that yours didn't do either of the two...
great job, where did you get it and how much would i be looking at to get some?
i used 2 rolls of 12" x 33.5ft of peel and seal i bought from menards on sale for $24.99
want the price of dynamat?
http://cgi.ebay.com/ws/eBayISAPI.dll...701762595&rd=1
thats $100 for 36sq ft, thats $2.77 per sq ft
i used 67 sq ft and paid $50, thats $.74 per sq ft
want the price of dynamat?
http://cgi.ebay.com/ws/eBayISAPI.dll...701762595&rd=1
thats $100 for 36sq ft, thats $2.77 per sq ft
i used 67 sq ft and paid $50, thats $.74 per sq ft
Looks good, lots of work involved. Hopefully I'll get my front seats pulled and do the floor like that once my work slows down, want to do the headliner too.
Dynamat dosen't smell at all BTW.
Let us know how much better things sound, you should be able to tell by just driving around, the front doors are important
Dynamat dosen't smell at all BTW.
Let us know how much better things sound, you should be able to tell by just driving around, the front doors are important




Props to you man! You did a AWESOME job!