My T4 turbo LN3
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: ATL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
My T4 turbo LN3
here are my pics of the car ive gasket matched the LIM, polished all the lower runners gutted the throttle body and various other things to get ready for my turbo
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: ATL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
i had a shop vac and thats why i had the cylinders stuffed with shop rags when i pulled the LIM off anyway there wasnt a single shaving in the cylinders yea im thankful for that much my y- pipe should be coming soon so i can start on my t4 flange
#7
Wow. I would love to see a write up on all the things you've done. Just a load of comprehensive info. I'm extremely interested to know exactly what you've done! And also, what kinda power are you seeing from it? Maybe 1/4 numbers? 0-60?
Little unorthodox on the P&P, but oh well.
Little unorthodox on the P&P, but oh well.
#9
Member
Posts like a V-Tak
Thread Starter
Join Date: Mar 2007
Location: ATL
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
correct ithe P&P was half assed at first till i took it off and gasket matched the LIM and took some more turbulent parts out of it i also fabed a spacer 1/4in to increase air volume
my current mods are
P&P LIM, trans go shift kit with adj. vacum modulator along with the B&M shift kit, Iridium plugs,gutted throttle body 85mm Northstar MAF, POLY injected trans mounts, W-body top mounts, POly tie rod and ball joint dust boots, Apexi SAFC, magnaflo high flow cat,hooker ultra flow, coolant holes plugged at LIM, Dexron 5 trans fluid, 180* drilled thermostat, 180*electric fan thermostat, Ground wire kit, 8000k h.i.d, tac welded sub frame, Battery reloacated to trunk,Alternator re-wire kit using 2 gauge wire,PCV mod,S1 UIM swap theres more that i cant think of right now
my current mods are
P&P LIM, trans go shift kit with adj. vacum modulator along with the B&M shift kit, Iridium plugs,gutted throttle body 85mm Northstar MAF, POLY injected trans mounts, W-body top mounts, POly tie rod and ball joint dust boots, Apexi SAFC, magnaflo high flow cat,hooker ultra flow, coolant holes plugged at LIM, Dexron 5 trans fluid, 180* drilled thermostat, 180*electric fan thermostat, Ground wire kit, 8000k h.i.d, tac welded sub frame, Battery reloacated to trunk,Alternator re-wire kit using 2 gauge wire,PCV mod,S1 UIM swap theres more that i cant think of right now