Look at my rear haunches.
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 0
Likes: 0
Look at my rear haunches.
Showing off the aluminum trailing link coil suspension lower control arm.
You can see the height adjustment link rod with rheostat controller.
You can see the rear disc set-up.
Senior Member
True Car Nut
Joined: May 2003
Posts: 8,135
Likes: 1
From: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Wow, i bet with all that mud, rust and other crud under YOUR car Paul, it must be really hard to work on... 
Senior Member
True Car Nut
Joined: May 2005
Posts: 3,448
Likes: 7
From: _Phoenix, AZ_ _WCBF '05, '06, '07 Survivor_ ____NEBF '07 Remnant___
Nice shots Paul...it is always nice to see some of the behind the scenes components that doesn't always get shown.
* hmmm...winter must be setting in..Paul is starting to ***** the bullet from inside the garage*...j/k Paul
* hmmm...winter must be setting in..Paul is starting to ***** the bullet from inside the garage*...j/k Paul
Senior Member
Posts like a Northstar
Joined: Apr 2004
Posts: 566
Likes: 0
From: Minneapolis, MN
So, stupid question here, but I'm curious about those calipers. Nobody has commented on them, so I'm led to believe they're stock....but those seem far too interesting to be something mass produced by GM. So...what'* the deal?
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 0
Likes: 0
So, stupid question here, but I'm curious about those calipers. Nobody has commented on them, so I'm led to believe they're stock....but those seem far too interesting to be something mass produced by GM. So...what'* the deal?
