dont use taps on cars, they corrode and or vibrate loose and cause issues, you should always solder or butt splice

I'll have to check out the situation in my door, would wiring them into the window work?

that would work but i personally would spend the little extra effort and wire them to the aux out or ant out of the HU. that way they go off with the radio

i dont really want to rip my dash off :/ idk if ill use these.. unless would hooking some wire up to the battery wire of my amp where it connects to the battery work if I attached it to a toggle and ran the led light wires to the toggle switch?

you should be able to get to the aux wire pretty easy they had to run that back to the amp to turn it on

oh ok i know where thats at, idk i dont think im going to risk messing that wire up, i think im going to just leave the lights out of this one..

Come on, you can't give up that easy. If you don't want to go that far, just tap into the power window wires.

i just dont want to cut my wires up and end up screwing something up

just wire em to the remote and neg of ur amp

i tried that before, she didnt want to do it, honestly that would be the best and easiest way without messing with your cars wiring.

you can intercept those in the car they probably ran them under the carpet on outside of the seat pass or driver