decision to make... tough one!!!
Thread Starter
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
decision to make... tough one!!!
taken from: http://www.bonnevilleclub.com/techinfo/?article=67
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM!!!! 
I would also suggest doing one lense first to see if the effect is really what you want.
Thread Starter
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
WOW.......so much easier than the 95... no cutting or anything...
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
Junior Member
Joined: Aug 2005
Posts: 1
Likes: 0
From: North of Buffalo, NY *** NEBF '05, '06, '07 *** ***ONBF & NYBF 06; 07*** ***WCBF 06***
No tough decision at all....DO IT!!! Toasted Oats is the King of Cleared Corners on the 2000+ models on the East Coast...
EDIT: Whoops! Didn't realize you were in the process of doing it...ya'll posted while I was making this post!
And here'* a visual difference on two identical cars:
EDIT: Whoops! Didn't realize you were in the process of doing it...ya'll posted while I was making this post!
And here'* a visual difference on two identical cars:
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 6,837
Likes: 3
From: Fitchburg Ma _ToastedRice_
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
Thread Starter
BANNED
Joined: Mar 2004
Posts: 0
Likes: 5
From: Purgatory
Originally Posted by toastedoats
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 6,837
Likes: 3
From: Fitchburg Ma _ToastedRice_
Originally Posted by harofreak00
Originally Posted by toastedoats
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
Senior Member
Certified GM nut
Joined: Sep 2005
Posts: 2,009
Likes: 0
From: Home Sweet Home in New York
Originally Posted by harofreak00
WOW.......so much easier than the 95... no cutting or anything...
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
LOL, the 95 is easy:
www.ebay.com
www.paypal.com
Take parts out of box, remove 2 thumbscrews and 4 10mm nuts
take old corners out
put clear corners in
Return bolts
Chuckle