So, i started working on my body work again so I can get this thing painted this summer.
Just to give you an idea of how much more work i gotta do, the only parts that are 100%done are: rear bumper, passenger side doors, roof, bottom half of the drivers side door, and around the drivers side light.
Molding in the drivers side light took me 3 days working about 3 hours a day. Theres no pin holes, 80/180 grit scratches, and i blocked/hand sanded it till it was perfect. built everything up with a lot of kitty hair fiberglass, filled in the major imperfections with bondo and finished it off with some lightweight bondo. Sh*t was s0o0o0o0 tedious. The passenger side is gonna be harder because my hood is bent from a crash and my bumper is ripped below the light.
The only other really hard part is finishing up shaving the 2 front fender body lines. All the other stuff is just little dents and high spots.
I know
so i borrowed my friends digi cam and pics will be up tonight.

we want daytime pics too, not this nighttime crap :P

hahaha i've done that alot in the past.
It'* raining till sunday so i'll do the best i can.
There will definitely be another round of pics when the suns beating down on it.

Heres the pics:
This is what i started with:

Heres the light all molded in:








I put some more fiberglass on the back to add support:

The other light with some fiberglass i've gotta knock down:



Some other pics:



So whatcha think so far?

The bodywork looks a little rough, but that can be fixed with some more time spent on it.

Yeah still under construction but all that stuff listed above will look like glass.

Interesting look.

Can't wait to see it when it'* all done

Tell me how the painting goes. My time is coming. Love the headlights.

That thing is Siiiiiic!!!!

awesome, we look like we have the same tint strip.............na mine is waaay bigger