Well, for Christmas, or as soon as possible, I am going to get some angel eyes. I have been wanting some. I was wondering if you guys could post some pictures of your angel eyes and what they look like. I would appreciate it. Thanks.

just bought mine off ebay for $42 shipped...

ill be putting them on sometime this weekend

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWN:IT

$42, that'* not bad. How hard are they to install? The installation process is the only part holding me back. I'm afraid of blowing something up with the wiring :? How are you thinking about wiring it? A seperate switch for the LED rings? If you could take some pictures in the process of installing it i would REALLY appreciate it. It would help a lot of others too.

yeah ill take some pics...

i plan on running the lights through the stock for wiring, and then running the rings off an accessory switch i mounted a long time ago

Aight, thanks bro. That wil help me a lot. I'm not too good when it comes to working with electrical stuff. Home audio and stuff like that, I'm in like Flint. But car electronics.... that'* a whole nother story. :(

step 1: remove old lights
step 2: mount new lights
step 3: wire up new lights
a. run ground wire
b. run power wire
c. run accessory wire

step 2 & 3 are interchangable...

its not that hard...only gotta worry about 3 wires, and 2 are already done for ya! just get that one wire through the firewall and ur set

Where does the wire end up after you send it through that little hole in the firewall (your talking about the one right behind the driver'* side strut tower, right)? Where did you put your switch for it? I want to put mine on the center console. If that won't work, whats the best alternative?

i didnt wanna mess up my center console so much, so i put the switch in a hidden(kinda) spot.

you know that piece on the bottom of the center console by the gas pedal, that has a vent in it, its basically a pointless flap of plastic to make it look like the center console goes all the way to the firewall ...well i cut in there with a dremel (its 1/4" thick") and put 2 switches in there when i put in my neons.

the yellow lines on this picture...on the drivers side though...just dont have a pic of that side

Will that mess up your wiring by putting differnt bulbs in? Or are they 885'*? Also can you put 100w bulbs in without frying the wire?? thanks

if you wanna see some pics of angel eyes here you go. these are the pilot 7 color angel eyes. enjoy. http://www.cardomain.com/memberpage/300261/5