Fuel injector plug test
Thread Starter
Retired Senior Admin
Expert Gearhead
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Fuel injector plug test
Locate your fuel injectors. You have 6 of them, 3 in front, and 3 in back.
Now locate the wire clip. Each plug has one of these.
Press this wire clip in towards the injector and then wiggle and pull the plug. Do not pull on the wires. Inspect for corrosion or damage, clean or repair if needed.
Now locate the wire clip. Each plug has one of these.
Press this wire clip in towards the injector and then wiggle and pull the plug. Do not pull on the wires. Inspect for corrosion or damage, clean or repair if needed.
Thread
Thread Starter
Forum
Replies
Last Post
