on the car

Specs for the GXP Suspension

FE5
30mm SOLID front sway, weighs about double the FE2 Bar
FE5 front Struts
16mm Front Springs FE5 spring rate, 14mm are the FE2

22mm SOLID rear sway, again weighs about double the FE2
deCarbon Rear shock absorbers with ELC
16mm Rear Springs FE5 spring rate

Rear FE2


New FE5 spring


FE2 Sway, its hollow




FE5 Sway, again this one is solid




Rear Shock Differences




Shocks installed on car





FRONT
Stock FE2 30mm and hollow


FE5 30mm and solid


Front FE2 Spring




FE5





Impressions: It raised the rideheight by about 1" the entire way around. BUT the car is on RAILS....DAMN when you turn the wheel the car turns, there is much less body roll. There is no dipping down on stops/starts. Its even more impressive because the car is a little lighter than a GXP

I don't Know how I miss this. WOW! Lookin good Pat. How did the rear springs go. I just got mine wrestled back in place for the winter. Hope to have new set of air struts fabricated and solenoids rebuilt by spring. Till then I'm at normal ride height again.

whats that number on the 30 mm bar?

assuming a part number

but you just woke up a 2 year old thread

Blame me (everyone does anyway).
I'm the one who was trying to help him out in his other thread to get the right parts. I originally used this thread to help me build my FE5 swap and get the things I needed. I just wanted to show him the differences.
Tad pushy.
I'm trying to help you out and you drag up a 2 year old thread demanding part numbers.
Look it up yourself. I already gave you the info from one source.

Geez. dh2

well sorry..lol im working hehe,..i was looking for it too

i would call GM and ask
or check http://www.gmpartsdirect.com/

If he would read his other thread, he would have noticed I already put up a price for the front bar right from GMPD. Somewhere along the line he was looking at the ride & handling bar, which isn't the one he wants. Performance & Handling is the FE5 bar. GMPD has no part numbers on them though, they say to just reference the part as described in their catalog.

i have been looking at that website,I have another one at home on that pc.

www.compnine.com is the best place to find part numbers for any make/model.

but IF you actually took the time to look at the picture of the bar IN this thread. You would see it has the part number on it.