Lambda Rotors
#1
Senior Member
True Car Nut
Thread Starter
Lambda Rotors
2017 Traverse, 60,000 miles, rotor warping. These are the original factory rotors. I live in an area that gets super hot much more often than it gets cold. All of the freeways are prone to going 80MPH-0MPH at any moment all the time, like stand the car on its nose every time kind of traffic. We are generally pretty easy on brakes, but with the traffic in this area, the hard stops can often only be avoided by crashing . . . or not driving at all.
I've used Napa rotors on most of my cars for years and had great luck with them . . . except the last few that ended up warping fairly easily. I have to suspect that the quality of their manufacturing has gone downhill.
I'm looking for what makes/series/models/etc. of replacement rotors folks have had good luck with over a long period of time. Maybe they need to be cross-drilled or grooved or whatever as well? I just want to replace them once then not have to think about them again for a long time and a lot of miles.
I've used Napa rotors on most of my cars for years and had great luck with them . . . except the last few that ended up warping fairly easily. I have to suspect that the quality of their manufacturing has gone downhill.
I'm looking for what makes/series/models/etc. of replacement rotors folks have had good luck with over a long period of time. Maybe they need to be cross-drilled or grooved or whatever as well? I just want to replace them once then not have to think about them again for a long time and a lot of miles.
Thread
Thread Starter
Forum
Replies
Last Post