NEED PART #
#1
Junior Member
Posts like a V-Tak
Thread Starter
NEED PART #
Hello all newbie here
My Name is Mike, I have a 2004 GMC Envoy. Need to replace some dash light bulbs but the parts stores do not have a listing on them. I pulled the panel off and they are the ones that soldered to the circuit board, which is no problem for me to replace if I can only find a good part # to search for them. I have tried Google with no luck. Just wondering if anybody out there can help me out.
Thanks in advance
Mike
My Name is Mike, I have a 2004 GMC Envoy. Need to replace some dash light bulbs but the parts stores do not have a listing on them. I pulled the panel off and they are the ones that soldered to the circuit board, which is no problem for me to replace if I can only find a good part # to search for them. I have tried Google with no luck. Just wondering if anybody out there can help me out.
Thanks in advance
Mike
#2
Senior Member
True Car Nut
I think the bulbs are T4.7
Research and decide for yourself before taking my word for it. I remember reading about it somewhere after I noticed that I need to replace some blubs in my 2001 Yukon XL. I haven't done it yet, so I'll be curious how this works out for you.
Research and decide for yourself before taking my word for it. I remember reading about it somewhere after I noticed that I need to replace some blubs in my 2001 Yukon XL. I haven't done it yet, so I'll be curious how this works out for you.
The following 2 users liked this post by CathedralCub:
04Gmcenvoy (10-04-2022),
Soft Ride (10-04-2022)
#3
Junior Member
Posts like a V-Tak
Thread Starter
T1 bulbs look the closest, I ordered CEC Industries #2162 Bulbs 14 V 1.4 W Wire Terminal Base (Box of 10) for $6.73 off Ebay should be here the 13th and will replace them when the wife is off for a day. Will let you know how it goes.
The following users liked this post:
CathedralCub (10-11-2022)
#4
Senior Member
True Car Nut
Cool, thanks!
#5
Junior Member
Posts like a V-Tak
Thread Starter
the T1 # 2162 bulbs worked great, simple job also took all of 30 minutes start to finish, they are a little dimmer but not enough that you can tell the difference.
Mike
Mike
#6
Senior Member
True Car Nut
The following users liked this post:
04Gmcenvoy (10-21-2022)
Thread
Thread Starter
Forum
Replies
Last Post
luminazkidd21
Audio (and aftermarket electronics)
6
01-22-2007 03:48 PM