Noisy ventilation
Thread Starter
Member
Posts like a V-Tak
Joined: Sep 2008
Posts: 51
Likes: 0
Noisy ventilation
I think i've got this problem figured out but i wanted to talk to some experts about it. When ive got the fan on (no matter what speed), after a while it'll start sounding really rough (noisy and grinding/rough kind of) as if its about to die, and it'll stop for a few seconds, then start again, but sounding really rough. air still comes out of the vents. from what i've been reading on here it sounds like the blower motor is shot, or on its way out.
what does everyone else think?
what does everyone else think?
Retired Senior Admin
Expert Gearhead
Joined: May 2006
Posts: 29,661
Likes: 43
From: Sheboygan Wisconsin
Sounds like the blower motor is going out to me. You can find a replacement at Auto Parts Fast at RockAuto
Okie Hokie
Posts like a Camaro
Joined: Dec 2008
Posts: 1,107
Likes: 1
From: Durant, Ok 74701
gotta replace mine.. its on its way out
squeals like a dying pig, stops and starts sqealing all over again... sux but i just turn up the radio to tune it out... its too cold for no heat
squeals like a dying pig, stops and starts sqealing all over again... sux but i just turn up the radio to tune it out... its too cold for no heat
Senior Member
Posts like a Turbo
Joined: Dec 2008
Posts: 323
Likes: 0
From: Mississauga Ontario
mine squeaks a little bit when put on full blast in cold conditions, but i never use the air conditioning during the summer because im too lazy to fill the canister with gas, i just roll down the window and feel the breeze.
Member
Posts like a V-Tak
Joined: Nov 2008
Posts: 42
Likes: 0
Mine made noise at times- same like something grinding. But it was actually one of the radiator fans. The radiator fan has a metal shield on it and it is held with the plastic clips and that made the noise....just an idea, maybe same for you.
Thread Starter
Member
Posts like a V-Tak
Joined: Sep 2008
Posts: 51
Likes: 0
Fixed!
The problem was the blower motor...when i took it out and spun it...well it didnt spin well at all haha. the new one works like a dream.
One thing though, the plastic covering around the blower motor, there is a tube that goes into the hole in the motor casing itself, but goes through this plastic cover. Now my cover is breaking around this area, so i'm not sure if the tube is going to stay in fully all the time (i'm afraid its going to come out).
Does anyone know what this tube does? or if theres a potential to replace that plastic cover?
The problem was the blower motor...when i took it out and spun it...well it didnt spin well at all haha. the new one works like a dream.
One thing though, the plastic covering around the blower motor, there is a tube that goes into the hole in the motor casing itself, but goes through this plastic cover. Now my cover is breaking around this area, so i'm not sure if the tube is going to stay in fully all the time (i'm afraid its going to come out).
Does anyone know what this tube does? or if theres a potential to replace that plastic cover?
Okie Hokie
Posts like a Camaro
Joined: Dec 2008
Posts: 1,107
Likes: 1
From: Durant, Ok 74701
not sure of its intentions due to the lousy picture diagram on my comp...
gm can replace both with new for 59.21 List after tax
Tube - # 3035192 - 9.82
Cover - # 52468407 - 44.44
probably a couple days shipping but and gm dealership could get em, or a member or a scrapyard if you find one in good condition
gm can replace both with new for 59.21 List after tax
Tube - # 3035192 - 9.82
Cover - # 52468407 - 44.44
probably a couple days shipping but and gm dealership could get em, or a member or a scrapyard if you find one in good condition
Thread
Thread Starter
Forum
Replies
Last Post