hey guys i got her going again, we changed the fuel pump and then the crank sensor she runs really good now, but i have a few other things that maybe you guys can help with, i still have the problem with the gauges i have cleaned the cable ends good, the startup lights work (check engine,oil,seatbelt etc.) but none of the gauges work nor does the compass or driver info panel any ideas?

I'd start with removing the cluster and hoping one of the two plugs is not connected.

If all is connected, remove the cluster, take it apart, and clean up all connections. Also, check for small cracks in the solder around those connections and large parts on the board. Re-solder them just to be sure.

Here ya go, from the electrical section of Techinfo. This is the article Archon is eluding to.

http://www.bonnevilleclub.com/forum/...e=article&k=93