Thanks for all you help with the exhaust advice but now im on the next bit. Im looking for a cold air intake to replace that piece of **** stock air filter. Thing is such a pain in the ***. So i was wondering if anyone can hook me up with a website to purchase from or a local store that can hook me up. Thanks again.

~Aaron

Your best bet would be to go to Autozone or your local parts house and look for the Spectre intake tube for the Honda Civic
Comes in a generic looking plastic case it'* around 35 bucks.

The next thing aould be the filter. www.ajusa.com for the K&N RX-4750.
Quite a few of us have this filter and it would probably be the best one for ya

Coupler to the throttle body can be found here http://www.siliconeintakes.com/reducer.htm
You'll need the 3.75" to 3" reducer.

The best place for the IAT sensor is in the filter. You can either get the IAT harness from www.intense-racing.com. It'* this one..Casper'* Electronics IAT Harness Extender. Or,if you are handy with a soldering gun,just extend the IAT wires to reach the hole in the filte . Which happens to be the best location for it.

Fab up a heat shield and you're good to go

Thanks guy, found all the parts and putting in order.

Here'* a link for the tube you need

spectre intake tube

Thanks for all your help i just put in the orders for each of these parts that i need. Tomorrow i'll go get the Honda Civic Spectre intake tube. You say i can get this at autozone or pep boys? Will there be anything else that i need for attatching this Intake?

~Aaron

Only other thing I can think of is 3 hose clamps :?

Damn do you live on here? Lol do you have AIM? Mine is Crimsonbllood, i'd like to talk to you about other things i can do to this car if you wouldn't mind talking with me.