A new shop just opened up in Philly and they only charge $65 for 4 pulls with a wideband.
Any hp/tq guestimates?

Don't blow her up!!!!!!!!

I've been trying not to for a while.
I got bored and found the site:
http://www.phillydynoworks.com/

Good to hear you're gonna get some numbers on that thing. Honestly, I've been waiting for you to either dyno or drag that car for a looooong time . I'm very curious about the kind of power you're making.

With a stage one cam and the heads you've got, I'm thinking 200-210 at the wheels. What are you hoping for?

I will say 195 HP at the wheels

193 hp / 212 tq

My car is finnally running right. Otherwise I would have done this a long time ago. I should be getting a couple chips from Ryan at Sinister Performance (gmtuners.com) this week to try out. Right now were working on elimintating the AFC and bringing up the timing. In addition to the a/f adjustments, the two chips will have 3 and 6 degrees added ignition timing. I'm trying to at least max out on timing before I dyno. The a/f will really be tweaked while on the wideband.

As for my guess, I'm not telling.

Keep them comming.

Well over 210hp at the wheels easily, or something is wrong with it. Just a geuss

Hmmmm, I don't know about that. I figure a stock L36 should make about 160-170 at the wheels, and he probably has 40-50hp in mods bolted on, so 200-210 is where I will stay!

I have similar bolt ons as :
http://www.zzperformance.com/weekly_...e57c6f74783bec
Except I don't have higher compression, a cutoutor a higher stall converter (lowers hp).
I don't expect my dyno to be that high but it'* just food for thought.