When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My transmission was worked on to stop dripping when I parked it wrong. They plugged up a breather hole in yoke but that didn't work, still leaks. Not the end seal on trans but I need a rubber ring that goes around the yoke shaft.I think. Do you have a picture of this so I can take it to parts house and show them what I need. Do yall have another Idea? Thanks, Big Nick
My transmission was worked on to stop dripping when I parked it wrong. They plugged up a breather hole in yoke but that didn't work, still leaks. Not the end seal on trans but I need a rubber ring that goes around the yoke shaft.I think. Do you have a picture of this so I can take it to parts house and show them what I need. Do yall have another Idea? Thanks, Big Nick
Originally Posted by Soft Ride
Which auto transmission is it with the 5.0? Eg: TH-400 ?
Originally Posted by Mike
This seal?
Looks like we need to know the type of transmission that you have. With it being a 1986MY and a stock 305 we can guess that it is likely a THM700-R4 .
Is this correct?
Does it have 2WD or 4WD ?
Can you get us a picture of the leak and related parts?
Last edited by CathedralCub; 04-16-2018 at 05:51 PM.
Reason: Added quote code that the robots omitted
stock 2 wd. I think its 400. does that have the corner cut of pan seal ?
I can't say I know of any vehicle that came stock with a 305 and a THM400. 305'* usually came with a THM350 or 700-R4 in automatic pickups. Your description sounds like a THM350. Check this out and then we can be sure: