So took my car to the shop after it kept dieing the said it was the maf and tps (changed it a week ago) so brought the car home changed the maf and took the tps back and got a new one installed them drove it around put the scanner on it 0 codes the car idles a around 1000 will that works its self out or did i mess up installing them

You may have messed something up. Check for a vacuum leak, also check the change TPS write up. There'* a trick to installing the TPS the right way. It'* easy to install wrong.

Hmm.. your throttle body isn't sticking or dirty is it?

Just something to ponder until the gear heads arrive.

shouldnt be i cleaned while changing the maf

Everything should be cleaned. A sticking or dirty IAC can cause idle problems.

i have also changed the iac same time i changed the tps the first time i was horribly dirty

I would check for vacuum leaks around the sensors. There'* a O ring on the IAC and the MAF.

sometimes the seat were the iac is as bad as the iac and needs to be cleaned up

the idling has settled down it no idles at 600rpms with the a/c off and 700rpms with the a/c on

Good to hear you got it sorted out.