i decided against the fuel pump as the car was running way to good off idle and i could start it with a flick of a key so i went with the plugs first. put delco double plats in it today and man what a difference. the car pulls harder that it has in a while. i accidentaly did a burnout leaving my house today. but it still misses on one cylinder and on occasion 2 so its leading me to believe a coil is bad. anything else you guys can think of.

Scan it.

Check it..

Test the coils. however, even when they test good they can still miss. What code are you getting? Are both cylinders missing on the same coil?

My car shows no codes I already scanned it. My car seems to have a problem showing codes it hasn't shown one since last year and I have had a ton of problems since then last code I pulled was a base cluster failure so idk if that could be why

well i started pulling plug wires off and when i got to 2 noticed the spark was less and intermittent so i repalced the coil and it still misses so looks like a ignition control modual now grrrrrrrrr

Yep. I always keep a spare around. You can test and test a ICM and it will say good. The problem is, any ICM test will tell you it'* bad. But does not tell you it IS good.

just got back from autozone. icm test said bad and they also pointed out to me that the thermal patch on it was missing so it probably had overheated

ordering one on rockauto now airtex is having a closeout at $53

Lets hope this fixes the problem.