Will this work?
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2004
Location: Mastic, NY NEBF2 Survivor
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Will this work?
http://cgi.ebay.com/ebaymotors/97-98...ayphotohosting
Would that plug and play to my current harness? Or would I need an SSEi harness?
I know that I would need new dash pieces too
Would that plug and play to my current harness? Or would I need an SSEi harness?
I know that I would need new dash pieces too
#2
You can make it work, but it will not plug right in. Unfortunalely, I think the 93 harness might be different cause I have the 93 Dash harness, and HUD accessories. I know the radio connector is different at minimum.
#3
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Jan 2004
Location: Mastic, NY NEBF2 Survivor
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JimmyFloyd
You can make it work, but it will not plug right in. Unfortunalely, I think the 93 harness might be different cause I have the 93 Dash harness, and HUD accessories. I know the radio connector is different at minimum.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Garb...there isn't time at NEBF to do that plus the seats. Although the seats and console need to come out to rip the dash out. Bet Randy and I could have it pulled in record time.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
#7
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BillBoost37
Garb...there isn't time at NEBF to do that plus the seats. Although the seats and console need to come out to rip the dash out. Bet Randy and I could have it pulled in record time.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
#8
DINOSAURUS BOOSTUS
Expert Gearhead
Originally Posted by Mortehl
Originally Posted by BillBoost37
Garb...there isn't time at NEBF to do that plus the seats. Although the seats and console need to come out to rip the dash out. Bet Randy and I could have it pulled in record time.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
Just keep Pokey Pat outta the car. I still don't know why 2 hours later he only had the seats out.
j/k Pat..I'd move slower if my car was that nice.
#9
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
yes... one day it would have been done...remember it took the better part of a night and morning to do the 2 complete layers peel and seal ( and it was cold so i had to heat up each individual piece before i layed it down). i cleaned my carpet while it was out....also i didnt have the right Drivers seat control module, and had to go the the Junkyard....then seeing that that woundnt work...we took a trip to Randy'* house to look for a connector....then to the towing yard to finally get the connector out of a Tahoe.....It was 9:30 before we got back to even begin to figure out the wiring....
there was alot of work that got done that didnt get noticed
there was alot of work that got done that didnt get noticed
#10
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1993 SLE
yes... one day it would have been done...remember it took the better part of a night and morning to do the 2 complete layers peel and seal ( and it was cold so i had to heat up each individual piece before i layed it down). i cleaned my carpet while it was out....also i didnt have the right Drivers seat control module, and had to go the the Junkyard....then seeing that that woundnt work...we took a trip to Randy'* house to look for a connector....then to the towing yard to finally get the connector out of a Tahoe.....It was 9:30 before we got back to even begin to figure out the wiring....
there was alot of work that got done that didnt get noticed
there was alot of work that got done that didnt get noticed
LOL. I was pulling your leg Pat. You did such a kickass job with what you did, from soup to nuts. (After you yanked your interior, you even cleaned the metal if I recall.