Upgrades for my son's 96 GP SE with a 3100
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2010
Location: Southern New Mexico
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Upgrades for my son'* 96 GP SE with a 3100
*Split topic*
Does anyone know of any perf. upgrades for my sons 96 GP SE with a 3100? Has 186k on the clock and going strong but looking down the road to wake it up a bit. Thanks
Does anyone know of any perf. upgrades for my sons 96 GP SE with a 3100? Has 186k on the clock and going strong but looking down the road to wake it up a bit. Thanks
Last edited by radomirthegreat; 09-18-2010 at 12:23 AM. Reason: Topic split by radomirthegreat
#2
DINOSAURUS BOOSTUS
Expert Gearhead
I've heard about putting a 3400 top end on a 3100, but honestly have no experience beyond replacing the LIM gaskets 3 times.
Last edited by radomirthegreat; 09-18-2010 at 12:27 AM. Reason: Topic splitting purposes
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2010
Location: Southern New Mexico
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Who knows I might end up getting the car back from my step-son as he'* had his eye on my Bonne since it has half the miles.
Last edited by radomirthegreat; 09-18-2010 at 12:26 AM. Reason: Topic splitting purposes
#4
Senior Member
True Car Nut
Join Date: Sep 2006
Location: Indianapolis, IN
Posts: 4,606
Likes: 0
Received 0 Likes
on
0 Posts
The 3100 has quite a few upgrades available. You should check out these two sites:
WOT Tech
Milzy Motorsports
You can get a cam, a throttle body without a tune since the MAF sensor is external, new air intake ducting for smoother and cooler air, a filter, exhaust including headers, the top parts from a 3400 as Bill mentioned, and some gaskets with larger opening between the intake manifolds and port matching to go along with them would be great for it!
WOT Tech
Milzy Motorsports
You can get a cam, a throttle body without a tune since the MAF sensor is external, new air intake ducting for smoother and cooler air, a filter, exhaust including headers, the top parts from a 3400 as Bill mentioned, and some gaskets with larger opening between the intake manifolds and port matching to go along with them would be great for it!
Thread
Thread Starter
Forum
Replies
Last Post