Ultimate Filter! (new product test by willwren/allmachtige)
#11
Junior Member
Posts like a Ricer Type-R
The filter Hector sends with the intake isn't bad at all. It'* built just like a K&N. This change for me was more of a brainstorm than anything. Imagine the ADTR intake cost if he included this filter with it! YIKES!
I'd say use the filter that comes with it, and when it gets dirty the first or second time, make the swap. I just wanted something that would really fill the void well. My heatshield MIGHT work with it. Since I have both filters here, I can make sure this weekend. It'll be a pretty simple design this time.
I'd say use the filter that comes with it, and when it gets dirty the first or second time, make the swap. I just wanted something that would really fill the void well. My heatshield MIGHT work with it. Since I have both filters here, I can make sure this weekend. It'll be a pretty simple design this time.
#13
Senior Member
Posts like a Northstar
Join Date: Dec 2002
Location: Western, Mass
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
That hole is for the IAT. They place the Xterra ones there. That filter is placed with the Xterra filter charger K&N kit.
I want that filter. I figured that one was the one you guys had in mind
I want that filter. I figured that one was the one you guys had in mind
#14
Junior Member
Posts like a Ricer Type-R
Yup....worked out pretty well. I was already in the hunt when Kyle and I started talking on IRC about it. We joined forces, then I found this one. We've had some phone calls, pm'* emails, and YM back and forth on this, making sure it would fit, etc.
I'll post some pics when I get the heat shield designed and fitted. Should be tomorrow sometime, Sunday at the latest.
I'll post some pics when I get the heat shield designed and fitted. Should be tomorrow sometime, Sunday at the latest.
#15
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
I like it guys. When my K&N cone gets dirty I'm going to replace it with one of those x-stream filters, I've seen those before. Gotta flow even better than a regular K&N cone cause the front is filter.
89bonnie, you can get one of those to fit under the hood of your new aurora, I did. www.rsmracing.com
89bonnie, you can get one of those to fit under the hood of your new aurora, I did. www.rsmracing.com
#16
Senior Member
Expert Gearhead
Thanks Taylor
Offtopic sorry :(
Description of Product CDN $ 7999
*** Aurora SS package *** includes stainless cat-back 3" exhaust system, air intake, front and rear strut tower brace, lowering kit, 17" rims and 255/40/17 Z rated tires as shown, rear spoiler and SS badge. Increases output to 280 HP, provides incredible handling and unique look while retaining factory warranty. Available for 1994-2003 Aurora.
OK..ok, Mach sorry man, back to you in studio
Offtopic sorry :(
Description of Product CDN $ 7999
*** Aurora SS package *** includes stainless cat-back 3" exhaust system, air intake, front and rear strut tower brace, lowering kit, 17" rims and 255/40/17 Z rated tires as shown, rear spoiler and SS badge. Increases output to 280 HP, provides incredible handling and unique look while retaining factory warranty. Available for 1994-2003 Aurora.
OK..ok, Mach sorry man, back to you in studio
#17
Senior Member
True Car Nut
Thread Starter
Join Date: Sep 2002
Location: Genoa, Illinois
Posts: 4,013
Likes: 0
Received 0 Likes
on
0 Posts
That hole on the filter, if used for IAT sensor, is actually a pretty useful location...but I always believe that spraying cold nitrogen oxide over the IAT is an extra benefit. Thoughts? Believes? Hate?
BTW: I did cut the intake pipe, so now the hood sensor is back in place.
BTW: I did cut the intake pipe, so now the hood sensor is back in place.
#18
Senior Member
Certified GM nut
Join Date: Jul 2003
Location: Chicagoland
Posts: 1,712
Likes: 0
Received 0 Likes
on
0 Posts
Yay that SS aurora package is overpriced, but that is the INSTALLED price. Just get there intake and bored throttlebody and monting plate, ask me more about this when your ready to order, they don't list the plate, it'* an extra 100 us.
I don't know about spraying N20 over the IAT, I'm thinking not a good Idea. Way too cold over the sensor, and would probably make it flip out and start to have false readings over time, just mine opionion.
I don't know about spraying N20 over the IAT, I'm thinking not a good Idea. Way too cold over the sensor, and would probably make it flip out and start to have false readings over time, just mine opionion.
#19
Senior Member
Certified Car Nut
Join Date: Oct 2002
Posts: 11,308
Likes: 0
Received 0 Likes
on
0 Posts
I missed this post because I was recovering from my little experience with Rum and Cokes...but it'* all good since I'm picking mine up tomorrow
Thanks Will and Mach!!
Thanks Will and Mach!!
Thread
Thread Starter
Forum
Replies
Last Post