Series one Rockers.
#11
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Aug 2002
Location: Holley, NY
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Spacers
Jeff,
Do you have a pattern and thickness for the spacers? I hace a source for making them on a cnc..... Just need to know what they look like. Could I use a gasket as a template?
Steve
Do you have a pattern and thickness for the spacers? I hace a source for making them on a cnc..... Just need to know what they look like. Could I use a gasket as a template?
Steve
#13
Guest
Posts: n/a
you need to use a valve cover to make the spacer. the gaskets are just like a big shaped rubber ring that fits in a groove, i got the new cam from napa for 109 then 14 to send it to wash. state. and 128.25 to have it reground.
the name of the company is oregon cam grinding, (360)256-7985
just tell them that jeffrey hann refered you to them, they did a great job on my cam. but make sure you get a new cam from napa first ok. they have the cheapest cams out there, plus after the regrind , they do a rockwell hardness test on it. my cam still had a RC 55 hardness.
trust me, they do great work, they have numerous grinds, just tell him what you are looking for and he will help you.
the name of the company is oregon cam grinding, (360)256-7985
just tell them that jeffrey hann refered you to them, they did a great job on my cam. but make sure you get a new cam from napa first ok. they have the cheapest cams out there, plus after the regrind , they do a rockwell hardness test on it. my cam still had a RC 55 hardness.
trust me, they do great work, they have numerous grinds, just tell him what you are looking for and he will help you.
Thread
Thread Starter
Forum
Replies
Last Post
xtremerevolution
Performance, Brainstorming & Tuning
7
06-04-2010 06:52 PM
Dirtracr95
Performance, Brainstorming & Tuning
14
04-12-2008 02:40 PM
Performance, Brainstorming & Tuning
7
06-09-2003 07:37 PM
Performance, Brainstorming & Tuning
10
02-27-2003 09:53 PM