Series 1 Help
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Mar 2006
Location: Fort Worth, TX
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Series 1 Help
I love the resources here for all the aftermarket performance parts, however, I'm having trouble finding information on a 180 thermostat for my series I 3800. The majority of aftermarket vendors seem to be focused on Series II & III 3800s. Are the series I & II stats interchangable? My SE is not Supercharged. Thanks.
#4
Senior Member
Posts like a Camaro
Join Date: Apr 2006
Location: maitland fl
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
you think you've got it tough. i've got a van. even parts that fit don't say they fit.
i've got a 180 (stant) in my L27, picked it up at discount auto for like $10.
here'* another web site that will help you out a little when looking for S1 L27 parts
www.seriesoneperformance.com
hope that helps a little.
i've got a 180 (stant) in my L27, picked it up at discount auto for like $10.
here'* another web site that will help you out a little when looking for S1 L27 parts
www.seriesoneperformance.com
hope that helps a little.
#5
Junior Member
Posts like a Ricer Type-R
Seriesoneperformance.com is an unknown. He hasn't updated his website in FOREVER. He'* been poor on communication, and we don't even know if he'* still in business.
This isn't even mentioning the wrong parts he'* sold to members, including a Moderator of the Forum.
This isn't even mentioning the wrong parts he'* sold to members, including a Moderator of the Forum.
#8
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
Seriesoneperformance.com is an unknown. He hasn't updated his website in FOREVER. He'* been poor on communication, and we don't even know if he'* still in business.
This isn't even mentioning the wrong parts he'* sold to members, including a Moderator of the Forum.
This isn't even mentioning the wrong parts he'* sold to members, including a Moderator of the Forum.
The only person in recent history that got the wrong part was someone who ordered the wrong part, of which he admitted. I'm still going to take it back and get a refund/exchange on it at no cost. Most places would charge a restocking fee for that.
Will, check your PM.
#9
Junior Member
Posts like a Ricer Type-R
DrJay, your vendor status has already been revoked, so this is a non-issue. Read your PM. That'* from jr's3800 and I, with Jeff Keacher'* knowledge and support.
Further debate on the matter in this topic would not be a good idea. It took you five days to respond via email to a Staff Member regarding the status of your site, and there has been a history of unanswered or very late emails.
The issue is not open for discussion.
Further debate on the matter in this topic would not be a good idea. It took you five days to respond via email to a Staff Member regarding the status of your site, and there has been a history of unanswered or very late emails.
The issue is not open for discussion.
#10
Senior Member
Certified GM nut
Join Date: Feb 2003
Location: Georgia
Posts: 2,095
Likes: 0
Received 0 Likes
on
0 Posts
As I mentioned I put his further down on the answer list. The site runs mainly around the premise of tech advice, so that'* what I focus on. The tech emails are the only ones that get a delay, I can't think of any email asking about the status of an order or anything related that has had any kind of significant delay. If I'm wrong, this has never been brought up to me. I don't care about any change in vendor status on this board, I haven't been on here in a LONG time and it has had no impact at all. Again though, I don't run the site to sell parts. Hell I hardly sell any, it barely pays for itself. I keep it running because I have a LOAD of back-and-forth tech emails with people. As you can see I have minimal parts actually on the site and if someone asks about a part that'* not on the list 9 out of 10 times I'll just send them to the manufacturer directly. I just sent a guy over to a cylinder head rebuilder the other day instead of charging for it. With that in mind, my "vendor" status means little to nothing to me, for the most part I'm not a vendor....
My only concern is if someone feels they have somehow been wronged by me. So far you're the only person that has ever said anything derogatory.
My only concern is if someone feels they have somehow been wronged by me. So far you're the only person that has ever said anything derogatory.