SC pulley installed!
#1
Executed
Thread Starter
Join Date: Sep 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
SC pulley installed!
I don't believe its finally done. I have waited for this pulley install since about June when I ordered from SCperformance I didn't even need an smaller belt, the old one worked fine. I actually tried the smaller one and it wouldn't fit. I am getting about 11 or 12 pounds of boost and I don't remember ever getting anywhere near that much. I don't remember it going past 7 pounds. hmmm, maybe im mistaken but I know that gauge pegs out past the 10 limit. The car screams now, literally. The intake is so loud and whiny. Love it! Let me know what you guys think or any questions
#2
Junior Member
Posts like a Ricer Type-R
7 pounds? In this weather you should have been 9-10 stock. You have a bad boost gauge or SC. Was it really only 7 pounds before you did this?
How long did it take for SCPerformance to get that pulley to you? I really don't expect to ever see mine now, just curious.
How long did it take for SCPerformance to get that pulley to you? I really don't expect to ever see mine now, just curious.
#3
Executed
Thread Starter
Join Date: Sep 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
I think it was only about there, i never really paid too much attention to it esp at WOT whre i was watching the road instead. The pulley took from the middle of june to the middle of september to get to me and even then they sent me the wrong belt!! Bastards.
#4
Junior Member
Posts like a Ricer Type-R
Do you remember where the pulley was actually manufactured? SC Performance jobbed it out. Is there anything on a shipping label, receipt, anything on SCP or a Jobber?
#5
Executed
Thread Starter
Join Date: Sep 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
yeah actually it was shipped from good old Boston MA. I thought it was kinda weird since they wre based outta VA or MD or somewhere in there. I hated waiting so long but they said they were made to order and then said they screwed up my shipping address. Who knows, at least i got the pulley
#7
Executed
Thread Starter
Join Date: Sep 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
You know what, I think I threw it all out a couple weeks ago while i was home for the weekend but let me check.....yeah its all gone. crap, I wasnt even thinking of you when i threw it out. sorry.
#9
Executed
Thread Starter
Join Date: Sep 2002
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
The pulley is 2.5" The original was 3" I think but Will mentioned earlier 2.8" So maybe I wasn't as accurate as I thought. But anyway, noticeable difference now!!!