rockers question
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
rockers question
I'm planning to change the valve springs on my 97 SSEi to 105 springs. My thought is if I'm doing that, why not change the rockers at the same time? What rockers can I use? will 1.9 be to much with stock chain, pushrods, and valves? Or should I go with 1.8?
#2
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
alot of us run 1.9'* with 105'* on a 97, no problems, only benefits
edit: you will also want to change push rods.
edit: you will also want to change push rods.
#5
Member
Posts like a V-Tak
Join Date: Jul 2005
Location: Chandler AZ
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
If you use the Intense pushrods, get the oi restricted, I would steer away from lightweight. I had a set of Intense lightweight and one broke.
IMHO, 1:9:1 rockers with Comp cams 105# springs OEM pushrods are just fine. Your not going to see enough HP increase to require a push rod change.
Later,
IMHO, 1:9:1 rockers with Comp cams 105# springs OEM pushrods are just fine. Your not going to see enough HP increase to require a push rod change.
Later,
Thread
Thread Starter
Forum
Replies
Last Post
xtremerevolution
Performance, Brainstorming & Tuning
7
06-04-2010 06:52 PM
mAsalicio
Performance, Brainstorming & Tuning
4
05-28-2007 12:41 PM
Performance, Brainstorming & Tuning
10
02-27-2003 09:53 PM