Rear Endlinks completed today pics inside..
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Rear Endlinks completed today pics inside..
Well, i was bored, so i went ahead and installed the rear endlinks...
I used my 3" air cut off on this project..made it a bit easier..
The bushing cuts through like butter
Also did a tire rotation at the same time, which then led to a good cleaning of the inner wheels themselves..wow..talk about caked on goodness!
Left rear, already out
Shiney new parts!
Right Rear
I love the smell of cooked rubber in the afternoon!
RIP
Ohhh yeah!
Cleaned up the drums really well..didnt have any black paint..but i had some duplicolor rust into primer stuff..used that..and hi temp clear
Purdied up
Job well done, took it for a good drive, and i mean a GOOD drive hehe..
Handles WAY better, the *** end doesnt dive anymore...you can compare this to installing new struts..cause it sure tightens it up nicely
I used my 3" air cut off on this project..made it a bit easier..
The bushing cuts through like butter
Also did a tire rotation at the same time, which then led to a good cleaning of the inner wheels themselves..wow..talk about caked on goodness!
Left rear, already out
Shiney new parts!
Right Rear
I love the smell of cooked rubber in the afternoon!
RIP
Ohhh yeah!
Cleaned up the drums really well..didnt have any black paint..but i had some duplicolor rust into primer stuff..used that..and hi temp clear
Purdied up
Job well done, took it for a good drive, and i mean a GOOD drive hehe..
Handles WAY better, the *** end doesnt dive anymore...you can compare this to installing new struts..cause it sure tightens it up nicely
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i did the front ones last weekend..hehe and ofcourse being 4 wheel independent, they compliment each other perfectly.
All the shat that was inside of the wheels, well..weight reduction
I like rear drums, no brake dust, and usually they last the life of the car, unles u do alot of ebrake stops.
All the shat that was inside of the wheels, well..weight reduction
I like rear drums, no brake dust, and usually they last the life of the car, unles u do alot of ebrake stops.
#5
Senior Member
Certified GM nut
Join Date: May 2005
Location: Wickliffe, Ohio
Posts: 2,155
Likes: 0
Received 0 Likes
on
0 Posts
I love the smell of cooked rubber in the afternoon!
Ed
#6
Senior Member
True Car Nut
Join Date: Jun 2003
Location: Climax Springs, Missouri
Posts: 2,493
Likes: 0
Received 0 Likes
on
0 Posts
Your posts are really making me want to spring for a set of those, I think theyd compliment my existing mods quite nicely, in fact I almost bought some when I bought my kit, but I was kinda financially limited at the time as it was...Ill probably end up with some at some point though.
Right now im saving for that FWI...I need to stay focused on that
Right now im saving for that FWI...I need to stay focused on that
#7
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
GOD.................
I need to do mine sooo badly. New parts are always the prettiest.
On a side note..............
Is there any dirt anywhere on Damien??
I need to do mine sooo badly. New parts are always the prettiest.
On a side note..............
Is there any dirt anywhere on Damien??
#9
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dbeast420
On a side note..............
Is there any dirt anywhere on Damien??
Is there any dirt anywhere on Damien??