First mod questions
#1
Senior Member
Posts like a 4 Banger
Thread Starter
Join Date: Jul 2004
Location: Cincinnati,OH
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
First mod questions
I've been looking at the Intense Level 1 kit and feel that would be the best way to go. Since I can't use the CAI in that kit, I figure I can just make one like the 3" set up on Ebay. What size pulley would be the one to get ?
I'd also like to put on a high flow cat & exhaust. I would like a somewhat quiet exhaust, I don't want this to sound like some riced out Civic.What exhaust would be quiet, or just a little louder then stock ?
What kind of gains can I expect ?
Once it gets cooler out, I'll be taking it to the strip to get some baseline numbers.
I'd also like to put on a high flow cat & exhaust. I would like a somewhat quiet exhaust, I don't want this to sound like some riced out Civic.What exhaust would be quiet, or just a little louder then stock ?
What kind of gains can I expect ?
Once it gets cooler out, I'll be taking it to the strip to get some baseline numbers.
#2
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
i think the size pulley to get is 2.2 i am not sure on this but that is what most people are running i think i will have to search to verify this
#3
Senior Member
Certified Car Nut
For the series II start out with a 3.4 pulley.
For exhaust if you just change out the catalytic converter and muffler it'll sound better, and not terribly loud. Keep the resonator for sure. The piping is perfect for your application.
For exhaust if you just change out the catalytic converter and muffler it'll sound better, and not terribly loud. Keep the resonator for sure. The piping is perfect for your application.
#4
Senior Member
True Car Nut
Join Date: Jan 2004
Location: Chicago,IL MWBF '04 SURVIVOR MWBF '05 SURVIVOR Napa Manager
Posts: 3,955
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BonneMeMN
For the series II start out with a 3.4 pulley.
For exhaust if you just change out the catalytic converter and muffler it'll sound better, and not terribly loud. Keep the resonator for sure. The piping is perfect for your application.
For exhaust if you just change out the catalytic converter and muffler it'll sound better, and not terribly loud. Keep the resonator for sure. The piping is perfect for your application.
#5
Senior Member
Certified Car Nut
Because to keep the volume and raspyness down and mellow it out l ike he wants keeping the res will do him good.
For pulleys you want these for first mods.
92-93 2.2"
94-95 2.5"
96+ 3.4" (3.3 on race gas)
For pulleys you want these for first mods.
92-93 2.2"
94-95 2.5"
96+ 3.4" (3.3 on race gas)
#7
Senior Member
True Car Nut
Join Date: Jul 2003
Location: Westerville, Ohio 2000 Black SSEi
Posts: 6,127
Likes: 0
Received 1 Like
on
1 Post
Check out http://cocgp.clubgp.com its the columbus chapter of 3800 performance. We hold meetings monthly and you can learn a lot if you attend and get to know people. The forum is a great place as well to ask questions.
Thread
Thread Starter
Forum
Replies
Last Post