Pulley Sizes
Thread Starter
Member
Posts like a V-Tak
Joined: Jan 2004
Posts: 47
Likes: 0
From: regina
Pulley Sizes
I was wondering what size of pulley i could get put on car i have a 1992 SSEI the only mods i have done are intake and spark plugs and I am going to get a exhaust job done next but not to sure what type of muffler to get. Isn't the stock pulley a 3 inch pulley what would anybody thing for changing the size of it. One more thing what is a ZZP Thanks
Senior Member
True Car Nut
Joined: Jan 2003
Posts: 3,734
Likes: 0
From: Bloomington-Normal, IL 1997 SE
ZZP is a vendor that sells parts for our engines. You might want to get a new intake before you get the pulley so you dont get KR. check out www.zzperformance.com and www.intenseracing.com to look at some stuff. Unfortunatly for you, most of it is for Series II (1996 and up). Pulleyboys is a good vendor for pulleys.
Senior Member
Certified Car Nut
Joined: Mar 2003
Posts: 12,433
Likes: 2
Stock for a 92 is 2.55". 2.3" or 2.2" is a popular upgrade. ZZP is a performance parts site. www.zzperformance.com
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
Don't bother with ZZP for pulleys. Go straight to the vendor and cut out the middle man.
www.pulleyboys.com
If you're going 2.2", build a custom intake first. Don't go smaller than a 2.2". You'll lose boost.
www.pulleyboys.com
If you're going 2.2", build a custom intake first. Don't go smaller than a 2.2". You'll lose boost.
Thread
Thread Starter
Forum
Replies
Last Post
RPSSEI
Performance, Brainstorming & Tuning
3
Mar 21, 2005 05:46 PM