Powdercoating the blower
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Mar 2006
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Powdercoating the blower
Im am thinking of fixing up my bonneville, and one thing i thought might look neat is to have a gold blower and maybe valve covers. How would it effect the performance of the car to powdercoat the blower gold, assuming i block off the bottom of it and keep the bolt holes and all of that clean. COuld it stand to get up to about 400 degrees without hurting it or would that warp it?
#3
Junior Member
Posts like a Ricer Type-R
Any coating you apply to the SC, LIM, or Valve Covers will have a detrimental effect on cooling and performance unless you research it very well.
NASA is a good starting point, and that'* no joke.
NASA is a good starting point, and that'* no joke.
#4
Originally Posted by willwren
Any coating you apply to the SC, LIM, or Valve Covers will have a detrimental effect on cooling and performance unless you research it very well.
NASA is a good starting point, and that'* no joke.
NASA is a good starting point, and that'* no joke.
Thread
Thread Starter
Forum
Replies
Last Post
Pepin
Everything Electrical & Electronic
4
07-25-2011 04:00 PM
Tricked-T
Detailing & Appearance
2
03-17-2010 01:43 PM