Ported Throttle Body.....with PICS. 56k OK.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
We honestly don't know. I doubt a totally stock setup would benefit from it. But in my case, with the higher redline, ultra-fast Supercharger RPM'* (16,000 rpms), and good intake, I should get something from it considering I'm about to put a SMALLER pulley on the SC and a cam. I'll be demanding more air, and I want to make sure it'll get in there ok.
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 5
From: Texarkana, Texas
Of course the part Bill didn't tell is the most interesting 
I got a phone call at 1am with a lot of repeated "If it doesn't work I don't have a replacement".... So for the record, If it does infact turn out bad, I will personally ship my unmolested stocker up there. With Bill'* car I expect a nice result.
I got a phone call at 1am with a lot of repeated "If it doesn't work I don't have a replacement".... So for the record, If it does infact turn out bad, I will personally ship my unmolested stocker up there. With Bill'* car I expect a nice result.
Senior Member
True Car Nut
Joined: Sep 2004
Posts: 9,130
Likes: 0
From: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Originally Posted by Damemorder
Of course the part Bill didn't tell is the most interesting I got a phone call at 1am with a lot of repeated "If it doesn't work I don't have a replacement".... So for the record, If it does infact turn out bad, I will personally ship my unmolested stocker up there. With Bill'* car I expect a nice result.
I got a phone call at 1am with a lot of repeated "If it doesn't work I don't have a replacement".... So for the record, If it does infact turn out bad, I will personally ship my unmolested stocker up there. With Bill'* car I expect a nice result.
Thread Starter
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
I was on the phone at work today with Jwikoff (also at work) dorking with 3D models of the Series 1 Intercooler, and he also offered me a replacement 
We'll see, but not for 3-4 more weeks. Straitor, did you notice I cut and kept the backpressure plate for the MAF sensor?
We'll see, but not for 3-4 more weeks. Straitor, did you notice I cut and kept the backpressure plate for the MAF sensor?
Senior Member
True Car Nut
Joined: Nov 2002
Posts: 6,042
Likes: 5
From: Texarkana, Texas
Yeah.... I guess having that pimp endmill makes that an option... It really didn't affect much so I didn't dork with it with hand tools. You get better results than me and I've got a little job for ya eh?
