Performance Exhaust Tips
Thread Starter
Senior Member
True Car Nut
Joined: Feb 2004
Posts: 5,177
Likes: 0
From: Pennsylvania
Performance Exhaust Tips
Do you think these would work on a flowmaster or magnaflow exhaust system? Or even work at all with stock? It does not seem like a bad investment if they do what they are supposed to do.
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
i wouldnt waste the $$$
Junior Member
Joined: Jun 2002
Posts: 0
Likes: 0
This basically acts like a back pressure device. Moving parts will fail. 409 stainless is a low grade and will rust.
This would probably help someone who has gone overboard with a low restriction exhaust gain some of the lost low end torque back.
This would probably help someone who has gone overboard with a low restriction exhaust gain some of the lost low end torque back.
Senior Member
True Car Nut
Joined: Dec 2002
Posts: 5,857
Likes: 0
From: Halifax, Canada 91SSE / 97SSEi
Originally Posted by 2000SilverBullet
This basically acts like a back pressure device. Moving parts will fail. 409 stainless is a low grade and will rust.
This would probably help someone who has gone overboard with a low restriction exhaust gain some of the lost low end torque back.
This would probably help someone who has gone overboard with a low restriction exhaust gain some of the lost low end torque back.
I think it'* just a gimmick thing.
Senior Member
Certified Car Nut
Joined: Jun 2003
Posts: 15,928
Likes: 1
Originally Posted by willwren
there is no such thing as a 'performance' tip. They are purely cosmetic.
It'* just like open headers with the flappers.
