Just a heads up, there are at least two ways for the EGR tube to mount to the front manifold. My 92 EGR tube has a male threaded hookup. The EGR pedastel I got from a 93 has a female threaded hookup to the front mani.

Please keep that in mind when looking for PEM cores for your Series I.

remind me wtf a "PEM" is...

Ported Exhaust Manifold.

my front manifold doesnt have anyway to mount a egr tube to it some of the 92'* have no egr at all

Well, that too.

2 options in 92. No EGR, and wierd EGR. L67'* in 92 ALL got an EGR.

93-95 L67 EGR manifolds are identical.

Hmmm. Good info that I didn't remember, even if I had heard it before.
So, is it possible for you to just swap the EGR tube from the 93 parts car?

Yeah, I've got all the right parts I need. The PEMs are here, but I haven't taken them out of the box. This was an independent observation.

ill have to see what my new cores have, but i guess it doesnt matter to much since i would only have to get a EGR tube from a 93 then.

The EGR tube from the manfold to the bracket on the front cylinder head is part of the bracket. You may have to upgrade that whole piece (I recently replaced it on my 93).